6 carat emerald cut diamond ring
Ultimate guide to buying an 6 carat emerald cut diamond
6 carat emerald cut diamonds are a beautiful choice – their shape gives them unparalleled elegance and the incredible flashes of sparkling light they deliver are stunning.
Emerald cuts are one of the most popular shapes for 6 carat engagement rings, which means that there is a good supply of stones available and you should be able to find exactly what you are looking for.
It also means that finding the best 6 carat emerald cut can mean reviewing and rejecting sub-par stones. That’s where this page will help.
There are many factors that affect price and value of a 6 carat emerald cut diamond and no two emerald cuts are the same, even if the specs on the certificate indicate that they should be.
While it is possible to buy from a large retailer like Brilliant Earth, it’s a better idea to work with a specialist in significantly-sized diamonds, who can guide you through the process and ensure you get the most beautiful diamond and pay a fair price.
Our recommendation is Alon at The Diamond Oak, a third generation diamond dealer who puts a huge emphasis on personalised service and finding the right stone for each person.
I recommend you read the testimonials here and then see whether you think that Alon could be a good fit for you
6 carat emerald cut diamond price
As a broad range, the cost of a 6 carat emerald cut diamond can vary from $57,000 to $252,000.
To understand how much a 6 carat emerald cut diamond costs, we conducted research across three online diamond aggregation services which collectively have over 1,000,000 diamonds available to choose from.
That’s a significant range, and the price you will pay will depend on the color, clarity and the ‘make’ if the stone ie. how well the diamond has been shaped.
With diamonds, you generally get what you pay for, so ‘cheap’ 6 carat emerald cut diamonds will likely have a low-price for a reason – this may be significant inclusions (or ‘flaws’), yellow tinges of color or an undesirable shape.
But, when buying a diamond, there is always a balance that needs to be found between the 4Cs and the fifth C – cost. Where that balance is for you is an individual choice, so it can be worth looking at a few options to where you are comfortable compromising, and where you aren’t.
The table below will give you an idea of how color and clarity affect a 6 carat diamond’s price:
How much do 6 carat emerald cut diamonds cost?
This table shows the prices for 6 carat emerald cut diamonds at a range of colors and clarities.
It’s important to recognise that at this carat weight, there can be considerable differences between individual stones with similar specs on paper, so these are very much just a guide.
If a price doesn’t appear, it means that no diamonds at that spec were available at the time this article was written.
These prices are just guides, and factors such as the L/W ratio will affect the price of any individual stone, but should be a good guide to understand the relative pricing of different combinations of color and clarity for 6 carat emerald cut diamonds.
6 carat emerald cut diamond size
A typical A typical 6 carat emerald cut diamond may be around 12.14mm × 8.99mm × 5.84mm.
Here’s how it looks compared to a 5 carat and a 7 carat:
One important thing to understand when you are looking at 6 carat emerald cut diamonds is that carat weight is a measure of weight rather than size.
Carat weight is therefore spread out throughout the volume of the stone ie. length, width and depth.
This can mean that two 6 carat diamonds can actually appear very different sizes when set into a ring and viewed from the top.
As an elongated shape, 6 carat emerald cuts do appear much larger than their closely-related 6 carat asscher cut engagement rings or a round diamond at 6 carats, but may appear smaller than a 6 carat oval diamond ring, depending on the L/W ratio.
6 carat diamond L/W ratio
Length-width ratio is, unsurprisingly, the ratio between the length and the width of a diamond:
This can hugely change what an emerald cut diamond looks like
For smaller emerald cut diamonds, I usually recommend a L/W ration of 1.5:1, as this gives an elegant, elongated appearance.
However, for higher carat weights, a longer stone can look too large, and a shorter diamond may be preferable, both from a looks point of view, and cost.
Lower L/W ratio emerald cuts are generally priced lower that higher L/W ratios, as they use more of the rough diamond (which means less needs to be wasted) and there are more of them available (law of supply and demand coming into effect).
At 6 carats, a L/W ratio of 1.4 – 1.45 will look great on the finger.
6 carat diamond color
As you likely know, diamond color is graded on a scale from D to Z, although most diamonds used in jewelry fall into the D to M range:
Higher carat weight diamonds tend to show up color more easily than smaller stones, especially in the corners where they sparkle less.
If you want to ensure your diamond doesn’t have a yellow tint, it’s important to try and keep the color as high up the scale as possible.
On the other side of the equation is the effect color has on price.
In most shapes, the price difference between an H color, I color and J color diamond can be significant,
For most 6 carat diamonds though, I color is a good blend between being white enough so that it doesn’t look yellow, but also not paying more than you need to.
This applies equally to whether you are choosing a white colored setting (ie. platinum or white gold) or a yellow gold setting for your ring.
6 carat emerald diamond clarity
Clarity is a measure of the presence of inclusions (or flaws) within a diamond.
The clarity scale runs:
Emerald cut diamonds are a little different to most other shapes because they have a large, flat table on the top of the stone which can act like a window, making inclusions easier to see.
So, while with some other shapes, inclusions can be hidden under the angled top ‘crown facets’, emerald cut diamonds don’t usually allow this.
At higher carat weights, this issue is compounded as a bigger diamond means a bigger window where inclusions can be seen.
A good starting point for 6 carat emerald cut diamond clarity is SI1:
However, depending on the diamonds that are available at the time you are looking, you may need to increase this to VS2, or even higher, to ensure that the diamond is ‘eye clean’ and no flaws can be seen.
6 carat emerald cut diamond ring on the hand
Higher carat weight rings mean that additional considerations can be needed to be taken into account, depending on the ring setting style chosen.
These images of 6 carat emerald cut diamond rings on the finger will show you how big your ring could actually look.
6 carat emerald cut diamond solitaire ring
Solitaire settings are a great match for emerald cut diamonds – the simple style is a great pairing with the elegance of the diamond.
A major trend with settings is super slim and petite bands and prongs, which are effective in making the stone itself look larger.
While these can look great, some care does need to be taken with higher carat weights, as an extremely narrow band may not be wide enough to support the stone. It may twist on the finger and become uncomfortable.
If you’re choosing a solitaire setting to match a 6 carat emerald cut, I recommend you choose a band of at least 2.5mm width.
6 carat emerald cut diamond pave ring
When choosing a pave or channel setting, there is a big decision to make.
Should you go for an angular ‘stepped’ shape for the side stones, like more emeralds or Asscher cuts, which complement the center stone’s shape, or should you go for brilliant cut diamonds like round or princess cut, which may give more sparkle?
Either can be a great option, but one thing to consider is the color of the side stones.
Small, brilliant cut stones can appear whiter than step cuts, which means that even if you do match the color by the color grade, they still may appear whiter.
In cases like these, especially if you are going a little lower on the color on your center stone, it can be a good idea to work with an expert to ensure that the side stones complement the center stone.
6 carat emerald cut diamond three stone ring
Three stone emerald cut rings look great when paired with other step cut diamonds, particularly tapered baguette diamonds.
These work particularly well because the side stones make the transition from the long broad side of the emerald to the narrow band more gentle and more elegant.
6 carat emerald cut diamond halo ring
At 6 carats, some may feel that a halo is unnecessary to increase the size and impressiveness of the ring.
However, if you do choose a halo ensuring the side stones are a good match for the center stone is essential, due to their proximity.
Even more so than with a pavé or channel setting, working with someone who can color-match the side stones to the center stone is the best way to ensure that they complement each other well.
Best Place To Buy a 6 Carat Emerald Cut Diamond Ring
They do also both offer 6 carat emerald cut diamonds, and can be a good option if you are confident in making a decision yourself.
However, if you feel that you would like some assistance with the purchase (and at this carat weight and the level of expense involved, that can be a good idea), my recommendation is Alon Mor at The Diamond Oak.
Alon is a third generation diamond dealer who specialises in higher carat weight diamonds and puts a huge emphasis on personalised service and finding the right stone for each person.
I like this review of his service – it’s worth a read to understand just how special buying a diamond can be.
If you’d like to feel as special as the person in this review, I’d recommend getting in touch with Alon. Let him know you heard of him through Ringspo and he will go above and beyond to make the experience even more special.